An Experimental Study of Different Effects of EGR Rates on The Performance And Exhaust Emissions of The Stratified Charge Piston Direct Injection Compressed Natural Gas Engine
Saheed O. Wasiu, Shaharin A. Sulaiman and A. Rashid A. Aziz
Journal of Applied Sciences Volume 11, Number 9, 1479-1490, 2011
Abstract PDF Fulltext Citations XML References
Two-Phase Flow Behaviour and Pattern in Vertical Pipes
Journal of Applied Sciences Volume 11, Number 9, 1491-1500, 2011
Abstract PDF Fulltext Citations XML References
Distributed Formation Planning and Navigation Framework for Wheeled Mobile Robots
R. M. Kuppan Chetty, M. Singaperumal and T. Nagarajan
Journal of Applied Sciences Volume 11, Number 9, 1501-1509, 2011
Abstract PDF Fulltext Citations XML References
New Technique for Studying Soil-Corrosion of Underground Pipeline
Nordin Yahaya, Norhazilan Md Noor, Siti Rabe`ah Othman, Lim Kar Sing and Mazura Mat Din
Journal of Applied Sciences Volume 11, Number 9, 1510-1518, 2011
Abstract PDF Fulltext Citations XML References
Analytical Models for Energy Eudit of Cogeneration Plant
Zainal Ambri A. Karim and P. Waden Yongo
Journal of Applied Sciences Volume 11, Number 9, 1519-1527, 2011
Abstract PDF Fulltext Citations XML References
Investigation on The Particle Settling Velocity in Non-Newtonian Fluids
Rawia Abd Elgadir Eltahir Eltilib, Hussain H. Al Kayiem and Azuraien Jaafar
Journal of Applied Sciences Volume 11, Number 9, 1528-1535, 2011
Abstract PDF Fulltext Citations XML References
Structural and Properties Development of Expanded Austenite Layers on AISI 316L after Low Temperature Thermochemical Treatments
A. Triwiyanto, E. Haruman, M. Bin Sudin, S. Mridha and P. Hussain
Journal of Applied Sciences Volume 11, Number 9, 1536-1543, 2011
Abstract PDF Fulltext Citations XML References
Drag Reduction of Biopolymer Flows
A. Jaafar and R. J. Poole
Journal of Applied Sciences Volume 11, Number 9, 1544-1551, 2011
Abstract PDF Fulltext Citations XML References
Reconfigurable Stewart Platform for Spiral Contours
G. Satheesh Kumar and T. Nagarajan
Journal of Applied Sciences Volume 11, Number 9, 1552-1558, 2011
Abstract PDF Fulltext Citations XML References
The Combustion Behavior Analysis of Dual Fuel HCCI using the Shell Model
A. Satheesh Firmansyah and A. Aziz
Journal of Applied Sciences Volume 11, Number 9, 1559-1565, 2011
Abstract PDF Fulltext Citations XML References
Artificial Intelligent System for Steam Boiler Diagnosis based on Superheater Monitoring
Firas B. Ismail Alnaimi and Hussain H. AL-Kayiem
Journal of Applied Sciences Volume 11, Number 9, 1566-1572, 2011
Abstract PDF Fulltext Citations XML References
Modeling of Maintenance Downtime Distribution using Expert Opinion
Journal of Applied Sciences Volume 11, Number 9, 1573-1579, 2011
Abstract PDF Fulltext Citations XML References
Performance Improvement through an Asset Maintenance Optimisation System
Journal of Applied Sciences Volume 11, Number 9, 1580-1586, 2011
Abstract PDF Fulltext Citations XML References
Model of Neural Networks with Sigmoid and Radial Basis Functions for Velocity-field Reconstruction in Fluid-structure Interaction Problem
Mas Irfan P. Hidayat and Bambang Ariwahjoedi
Journal of Applied Sciences Volume 11, Number 9, 1587-1593, 2011
Abstract PDF Fulltext Citations XML References
Modeling of the Waxing-dewaxing Process in Scraped Surface Exchangers
Nassir D. Mokhlif and Hussain H. Al-kayiem
Journal of Applied Sciences Volume 11, Number 9, 1594-1599, 2011
Abstract PDF Fulltext Citations XML References
Verification of Interface Friction of Radial Ultrasonic Compression Using FE Simulation
Y. Daud, M. Lucas and K. R. Jamaludin
Journal of Applied Sciences Volume 11, Number 9, 1600-1605, 2011
Abstract PDF Fulltext Citations XML References
Performance and Emission Characteristics of Supercharged Biomass Producer Gas-diesel Dual Fuel Engine
S. Hassan, F. Mohd Nor, Z. A. Zainal and M. A. Miskam
Journal of Applied Sciences Volume 11, Number 9, 1606-1611, 2011
Abstract PDF Fulltext Citations XML References
Effect of Age of Pipes on Performance of Natural Gas Transmission Pipeline Network System
A. D. Woldeyohannes and M. A. A. Majid
Journal of Applied Sciences Volume 11, Number 9, 1612-1617, 2011
Abstract PDF Fulltext Citations XML References
Optimizing Injection Molding Processing Parameters for Enhanced Mechanical Performance of Oil Palm Empty Fruit Bunch High Density Polyethylene Composites
P. S. M. Megat-Yusoff, M. R. Abdul Latif and M. S. Ramli
Journal of Applied Sciences Volume 11, Number 9, 1618-1623, 2011
Abstract PDF Fulltext Citations XML References
Spray Characteristic Comparisons of Compressed Natural Gas and Hydrogen Fuel using Digital Imaging
Salah Eldin Mohammed, Emishaw D. Iffa, Masri Bin Baharom and A. Rashid A. Aziz
Journal of Applied Sciences Volume 11, Number 9, 1624-1629, 2011
Abstract PDF Fulltext Citations XML References
A Study of Bonding Mechanism of Expandable Graphite Based Intumescent Coating on Steel Substrate
Sami Ullah, Faiz Ahmad, P. S.M. Megat-Yusoff and Nurul Hazwani binti Azmi
Journal of Applied Sciences Volume 11, Number 9, 1630-1635, 2011
Abstract PDF Fulltext Citations XML References
Influence of Applied Load on Wear Characterizations of Rail Material
Windarta ., M. Bin Sudin and Khairul Fuad
Journal of Applied Sciences Volume 11, Number 9, 1636-1641, 2011
Abstract PDF Fulltext Citations XML References
Performance Evaluation of Stratified TES using Sigmoid Dose Response Function
Joko Waluyo and M. Amin A. Majid
Journal of Applied Sciences Volume 11, Number 9, 1642-1647, 2011
Abstract PDF Fulltext Citations XML References
Solid Freeform Fabrication of Prototypes Using Palm Oil Fly Ash via 3D Printing
N. M. Zain, N. H. Hassan, M. Ibrahim and M. S. Wahab
Journal of Applied Sciences Volume 11, Number 9, 1648-1652, 2011
Abstract PDF Fulltext Citations XML References
Predicting the Youngs Modulus of Single-Walled Carbon Nanotubes using Finite Element Modeling
E. Mohammadpour, M. Awang and M. Z. Abdullah
Journal of Applied Sciences Volume 11, Number 9, 1653-1657, 2011
Abstract PDF Fulltext Citations XML References
Gas Flame Temperature Measurement Using Background Oriented Schlieren
E. D. Iffa, A. R. A. Aziz and A. S. Malik
Journal of Applied Sciences Volume 11, Number 9, 1658-1662, 2011
Abstract PDF Fulltext Citations XML References
Multiple Performance Optimization for the Best Metal Injection Molding Green Compact
K. R. Jamaludin, N. Muhamad, M. N. Ab. Rahman, S. Ahmad, M. H. I. Ibrahim, N. H. M. Nor, M. R. Harun and M. Y. M. Daud
Journal of Applied Sciences Volume 11, Number 9, 1663-1667, 2011
Abstract PDF Fulltext Citations XML References
Effects of Electro-discharge Machining on Aluminium Metal Matrix Composite
A. Mouangue Nanimina, A. M. Abdul-Rani, F. Ahmad, A. Zainuddin and S. H. Jason Lo
Journal of Applied Sciences Volume 11, Number 9, 1668-1672, 2011
Abstract PDF Fulltext Citations XML References
Wear Properties of Alumina Particles Reinforced Aluminium Alloy Matrix Composite
Faiz Ahmad, M. Rafi Raza, A. Majdi Ab. Rani and S. H. Jason Lo
Journal of Applied Sciences Volume 11, Number 9, 1673-1677, 2011
Abstract PDF Fulltext Citations XML References