Special Issue
Journal of Applied Sciences Volume 12, Number 10, 0-0, 2012
PDF
Computational Modeling of High Temperature Processing Maps for Microalloyed Al-Cu-Mg Alloys Using Artificial Neural Networks
Sanjib Banerjee, Nastagis Niyaz Ahmed, Pranjal Bhuyan and Subhashish Baruah
Journal of Applied Sciences Volume 12, Number 10, 902-910, 2012
Abstract PDF Fulltext Citations XML References
Characterization of Electrodeposited Nickel-Al2O3 Composite Coatings by Experimental Method and Neural Networks
Journal of Applied Sciences Volume 12, Number 10, 911-919, 2012
Abstract PDF Fulltext Citations XML References
A Study on Performance-driven Microfabrication Methods for MEMS Comb-drive Actuators
M. Maheswaran and HarNarayan Upadhyay
Journal of Applied Sciences Volume 12, Number 10, 920-928, 2012
Abstract PDF Fulltext Citations XML References
3D Surface Characterization of Electrophoretic Deposition Assisted Polishing of SS316L
Arvind Chavan, Yogesh Gaikhe, Sandeep Huddedar and Raju Pawade
Journal of Applied Sciences Volume 12, Number 10, 929-937, 2012
Abstract PDF Fulltext Citations XML References
Latest Developments in Condition Monitoring of Machining Operations
S. Madhava Reddy, A. Chennakesava Reddy and K. Sudhakar Reddy
Journal of Applied Sciences Volume 12, Number 10, 938-946, 2012
Abstract PDF Fulltext Citations XML References
Effect of Cooling Environment on Grinding Performance of Nickel Based Superalloy Inconel 718
Sandeep Huddedar, Pankaj Chitalkar, Arvind Chavan and Raju S. Pawade
Journal of Applied Sciences Volume 12, Number 10, 947-954, 2012
Abstract PDF Fulltext Citations XML References
Artificial Neural Network Modeling for Predicting Surface Roughness in End Milling of Al-SiCp Metal Matrix Composites and Its Evaluation
D. Devarasiddappa, M. Chandrasekaran and Amitava Mandal
Journal of Applied Sciences Volume 12, Number 10, 955-962, 2012
Abstract PDF Fulltext Citations XML References
Optimization by Grey Relational Analysis of EDM Parameters in Machining Al-15%
SiC MMC Using Multihole Electrode
S. Murugesan and K. Balamurugan
Journal of Applied Sciences Volume 12, Number 10, 963-970, 2012
Abstract PDF Fulltext Citations XML References
Optimizing the Machining Parameters of Micro-EDM for Inconel 718
R. Manikandan and R. Venkatesan
Journal of Applied Sciences Volume 12, Number 10, 971-977, 2012
Abstract PDF Fulltext Citations XML References
Experimental Studies on Surface Roughness in Drilling MDF Composite Panels using Taguchi and Regression Analysis Method
S. Prakash, J. Lilly Mercy, K. Palanikumar, S. Ramesh, M.I. Rizwan Jamal and A. James Michael
Journal of Applied Sciences Volume 12, Number 10, 978-984, 2012
Abstract PDF Fulltext Citations XML References
Quality Improvement through First Pass Yield using Statistical Process Control Approach
R. Raj Mohan, K. Thiruppathi, R. Venkatraman and S. Raghuraman
Journal of Applied Sciences Volume 12, Number 10, 985-991, 2012
Abstract PDF Fulltext Citations XML References
Cycle Time Reduction for Bearing House Assembly
K. Saran Kumar Reddy, T. Panneer Selvam and R. Venkatraman
Journal of Applied Sciences Volume 12, Number 10, 992-998, 2012
Abstract PDF Fulltext Citations XML References
Performance of Silver Coated Copper Tool with Kerosene-servotherm Dielectric in EDM of Monel 400TM
R. Jothimurugan, K.S. Amirthagadeswaran and Joel Daniel
Journal of Applied Sciences Volume 12, Number 10, 999-1005, 2012
Abstract PDF Fulltext Citations XML References
Effect of Ribs and Stringer Spacings on the Weight of Aircraft Structure for Aluminum Material
K.N. Arunkumar, N. Lohith and B.B. Ganesha
Journal of Applied Sciences Volume 12, Number 10, 1006-1012, 2012
Abstract PDF Fulltext Citations XML References
Welding Parameters-Metallurgical Properties Correlation of Friction Welding of Austenitic Stainless Steel and Ferritic Stainless Steel
D. Manideep and K. Balachandar
Journal of Applied Sciences Volume 12, Number 10, 1013-1019, 2012
Abstract PDF Fulltext Citations XML References
Determination of SIF for a Crack Emanating From a Rivet Hole in a Plate using Displacement Extrapolation Method
A. Anand, L.J. Sudev and H.V. Lakshminarayana
Journal of Applied Sciences Volume 12, Number 10, 1020-1025, 2012
Abstract PDF Fulltext Citations XML References
Study on the Weld Quality of the Friction Stir Welded Al-6063 Plates Using Square and Pentagonal Profiled Tools
P. Karthikeyan and K. Mahadevan
Journal of Applied Sciences Volume 12, Number 10, 1026-1031, 2012
Abstract PDF Fulltext Citations XML References
Implementation of Lean Tools and Techniques in an Automotive Industry
B. Suresh Kumar and S. Syath Abuthakeer
Journal of Applied Sciences Volume 12, Number 10, 1032-1037, 2012
Abstract PDF Fulltext Citations XML References
Optimization of Constrained Machining Parameters in Turning Operation Using Firefly Algorithm
S. Bharathi Raja, N. Sathiya Narayanan, C.V. Srinivas Pramod, Arvind Ragunathan, Somala Raju Vinesh and K. Vamshee Krishna
Journal of Applied Sciences Volume 12, Number 10, 1038-1042, 2012
Abstract PDF Fulltext Citations XML References
Some Aspects of Cross Butt Friction Stir Weldments of Rare Earth Magnesium Alloys: Novel Attempts in Friction Stir Welding
M. Govindaraju, J. Kandasamy, M. Manzoor Hussain and K. Prasada Rao
Journal of Applied Sciences Volume 12, Number 10, 1043-1047, 2012
Abstract PDF Fulltext Citations XML References
Advanced Finite Element Analysis and Simulation in Superplastic Forming Process of Stepped Semispherical Die
P. Pradeep, S. Ayyanar, M. Balasubramanian, K. Ramanathan and V.S. Senthilkumar
Journal of Applied Sciences Volume 12, Number 10, 1048-1052, 2012
Abstract PDF Fulltext Citations XML References
Effect of Ageing on Mechanical Properties of Dissimilar Friction Stir Welded Aluminum Alloy (AA2024 and AA6351) Joints
P. Murali Krishna, D. Simhachalam and N. Ramanaiah
Journal of Applied Sciences Volume 12, Number 10, 1053-1057, 2012
Abstract PDF Fulltext Citations XML References
Parametric Study of Bonded, Riveted and Hybrid Composite Joints Using FEA
K. Mohamed Bak, K. Prasanna Venkatesn and K. Kalai Chelvan
Journal of Applied Sciences Volume 12, Number 10, 1058-1062, 2012
Abstract PDF Fulltext Citations XML References
Experimental Investigations on Delamination to Improve the Hole Quality in Chopped Strand Mat GFRP Material During Drilling Operation
T. Panneerselvam and S. Raghuraman
Journal of Applied Sciences Volume 12, Number 10, 1063-1066, 2012
Abstract PDF Fulltext Citations XML References
Investigation on the Change Effected by the Tool Type on the Hardness of Friction Stir Processed AA6063 Aluminium Alloy
D. Peter Pushpanathan, K. Ganesa Balamurugan and K. Mahadevan
Journal of Applied Sciences Volume 12, Number 10, 1067-1070, 2012
Abstract PDF Fulltext Citations XML References
The Influence of the Different Fiber lay-ups on the Damping Characteristics of Polymer Matrix Composite
P. Nagasankar, S. Balasivanandha Prabu and R. Velmurugan
Journal of Applied Sciences Volume 12, Number 10, 1071-1074, 2012
Abstract PDF Fulltext Citations XML References