Research Article
Application of Minimum Subordinative Degree on Choice of Key Defense Site in Battle
Henan College of Finance and Taxation, Henan City, China
Fan Naiying
Henan College of Finance and Taxation, Henan City, China
Commanders will have a complex consideration when they choose a key defense site. Many decisive factors will make effect on the result of a battle while the topographic factor play an important role. The topographic factors consist of the intervisibility rate, fire-control distance, number of visible highland and road, gradient and the difference of elevation (Luo and Tang, 2008). Of course, other factors are also significant like the tactics data of four highlands (highland A, B, C and D) is simulated in next part, which the optimal one will be finally picked out by the theory of MSD.
MODEL HYPOTHESES
We can define in the following a set of reasonable conditions and hypotheses that belong to a battle:
• | The effects of weather, vegetation and soil to the battle are ignored |
• | The battle in this study especially refers to the war on land |
• | The independent factor obeys the law of normal distribution |
DATA AND THE MSD MODEL
Data and description: The data and description is shown in Table 1.
MSD MODEL AND RESULT
MSD model: From the data in Table 1, the factor set contains 5 effect factors and 4 highlands A, B, C and D make up the solution set X. The weighing vector is (ω1, ω2,...., ωm) where ωi is the weighing of each effect factor. T = (αij)nxm is the decision matrix and R = (rij)nxm is the standard matrix where row vectors of R (ril, ri2, , rim) is correspond to solution set. According to the standard matrix R, x+ = (1, 1,....., 1) is defined as positive solution and x- = (0, 0,....., 0) is the negative solution. Obviously, the solution xi which is nearest to the positive one is the optimal. So the error is defined as following:
Our target is to pick out the solution with the least error , therefore a multi-target decision model is built below (Xu, 2004):
(1) |
Due to the weight of each solution in the solution set, (1) can be transfer to the single-target decision model in (Eq. 2):
(2) |
Table 1: | Data and description |
Then:
(3) |
Where:
Order the result from small to large and the minimum value is the optimal solution.
Especially, if the decider cannot provide and information of weighing, the single-target optimal model in the following is available (Li, 2003):
is the error between solution and the idea value.
Then, build lagrange function:
Where mean the:
and ω+ = (ω1+, ω2+,...., ωm+) is the optimal solution:
(4) |
Order the result from small to large and the minimum value is the optimal solution.
Model solution: Evaluate the weighing values of each factor if they are unknown.
Replace the data in Table 1 with X and U, then the decision matrix A is shown in Table 2 as bellow:
The standard matrix R can be achieved by excel (Jiang and Xie, 2003) (Table 3).
According to Eq. 1, the ω+ = (ω1+, ω2+,...., ωm+) is ω+ = (0.274433,0.057104, 0.204293, 0.214881, 0.249288).
Then: can be worked out:
• | f1+ (ω+) = 0.012477 |
• | f2+ (ω+) = 0.06913 |
• | f3+ (ω+) = 0.050017 |
• | f4+ (ω+) = 0.021596 |
where, f1+ (ω+)<f4+ (ω+)<f3+ (ω+)<f2+ (ω+) is obvious.
Table 2: | The decision matrix-A |
Table 3: | The standard matrix-R |
So, the optimal highland is A, then D, C and B is the undesirable choice. Besides, weighing value of each factor is displayed in vector ω+ = (ω1+, ω2+,...., ωm+).
In this study, we propose a model which can estimate weighing values of each factor in the case of not enough data and some key information. The result achieved by lagrange method makes positive effect when making decide.
But the weighing value can only order the solutions. Without a concrete case, the weighing values make no sense. In addition, the error of weighing value is significant when one factor make a overwhelming effect which is valuable to discuss deeply.