Li Quan-qing
Zhengzhou Institute of Aeronautical Industry Management, Zhengzhou, Henan 450015, China
Li Ming
Zhengzhou Institute of Aeronautical Industry Management, Zhengzhou, Henan 450015, China
ABSTRACT
This study puts forward the basic concept about reverse engineering. In the light of the applied target of reverse engineering and current situation of reverse engineering research, the paper presents the concepts about reconstruction parameter, objective prototype parameter and original design parameter in reverse engineering. It points out that the reverse engineering used in manufacture industry should evaluate reversely the original design parameters that are foundation of making new products. According to the applied target of the reverse engineering, the paper puts forward that the implement for reverse engineering is divided into similar design stage and precision design stage and correspondingly manufacture process is divided into the similar manufacture stage and the precision manufacture stage. The goal of the similar design stage is to obtain reconstruction parameters. The goal of the precision design stage is to obtain the original design parameters. The reverse engineering of the precision design stage is used to manufacture the products that must satisfy to assembling demand. The study shows the working model of the reverse engineering system that includes similar stage and precision stage.
PDF References Citation
How to cite this article
Li Quan-qing and Li Ming, 2013. Research on Parameter System and Key Technology of Reverse Engineering. Information Technology Journal, 12: 7906-7909.
DOI: 10.3923/itj.2013.7906.7909
URL: https://scialert.net/abstract/?doi=itj.2013.7906.7909
DOI: 10.3923/itj.2013.7906.7909
URL: https://scialert.net/abstract/?doi=itj.2013.7906.7909
REFERENCES
- Menq, C. and F.L. Chen, 1996. Curve and surface approximation from CMM measurement data. Comput. Ind. Eng., 30: 211-225.
CrossRef - Puntambekar, N.V., A.G. Jablokow and H.J. Sommer, 1994. Unified review of 3D model generation for reverse engineering. Comput. Integrated Manufactur. Syst., 7: 259-268.
CrossRefDirect Link - Wang, Y.H. and W.Y. Wu, 2007. Reverse engineering oriented to creative design. J. Mach. Des., 24: 1-3.
Direct Link