Fuwen Hu
College of Mechanical and Electrical Engineering, North China University of Technology, 100144, Beijing, China
Jiajun Li
College of Mechanical and Electrical Engineering, North China University of Technology, 100144, Beijing, China
ABSTRACT
Flying shears in rolling lines are used to cut rolled products into predefined lengths. A virtual reality simulation system was developed for two typical flying shears: rotary-crank type and rotary-drum type. Its main function modules consist of motion simulation, parameters calculation and a 3D visual knowledge base for the design and utilization of flying shears. Firstly, the development process of the virtual reality simulation system was put forward. Then the implementations of core function modules were discussed in detail based on the Virtools behavior technologies. Finally, the last section concludes the presented work and describes the future work.
PDF References Citation
How to cite this article
Fuwen Hu and Jiajun Li, 2013. A Virtual Reality Simulation System for Flying Shears. Information Technology Journal, 12: 4582-4587.
DOI: 10.3923/itj.2013.4582.4587
URL: https://scialert.net/abstract/?doi=itj.2013.4582.4587
DOI: 10.3923/itj.2013.4582.4587
URL: https://scialert.net/abstract/?doi=itj.2013.4582.4587
REFERENCES
- Fourqueta, J.Y., R. Le Bolloc'ha, S. Cailhola, A. Datas and B. Puelb, 2013. Using virtual reality and 3D industrial numerical models for immersive interactive checklists. Comput. Ind., 64: 1253-1262.
CrossRefDirect Link - Guttentag, D.A., 2010. Virtual reality: Applications and implications for tourism. Tourism Manage., 31: 637-651.
CrossRef - Makris, S., G. Pintzos, L. Rentzos, G. Chryssolouris, 2013. Assembly support using AR technology based on automatic sequence generation. CIRP Annals-Manu. Tech., 62: 9-12.
CrossRefDirect Link - Mujber, T.S., T. Szecsi and M.S.J. Hashmi, 2004. Virtual reality applications in manufacturing process simulation. J. Mater. Process. Tech., 155: 1834-1838.
CrossRefDirect Link - Raajan, N.R., S. Suganya, M.V. Priya, S.V. Ramanan and S. Janani et al., 2012. Augmented reality based virtual reality. Procedia Eng., 38: 1559-1565.
CrossRefDirect Link - Zhou, N.N. and Y.L. Deng, 2009. Virtual reality: A state-of-the-art survey. Int. J. Auto. Comput., 6: 319-325.
CrossRefDirect Link