Xiangying Meng
School of Mechanical and Electrical Engineering, Tarim University, Alar, Xinjiang, 843300, China
Xufeng Wang
School of Mechanical and Electrical Engineering, Tarim University, Alar, Xinjiang, 843300, China
Can Hu
School of Mechanical and Electrical Engineering, Tarim University, Alar, Xinjiang, 843300, China
Jianyun Jiang
School of Mechanical and Electrical Engineering, Tarim University, Alar, Xinjiang, 843300, China
Fengchen Han
Agricultural Machinery Manufacturing Co, Ltd., Alar, Xinjiang, 843300, China
ABSTRACT
The influence of sand damage on cotton plantation in southern Xinjiang of China becomes severe. In order to provide prevention and cure to the damage on the film, a stiffener film is developed and a stiffener film machine is designed based on the mechanical dynamics principle. The design is reasonable and the structure is simple. The processing experiment shows that the machine works reliably, the working efficiency is high, the film deformation is small and no damage. While field experiment indicates that mulch sowing is in normal, no anti-wind device on surface of the film, lighting surface increased, the recoveries for film is more than 97%.
PDF References Citation
How to cite this article
Xiangying Meng, Xufeng Wang, Can Hu, Jianyun Jiang and Fengchen Han, 2013. Design and Test of a New Film Processing Machinery. Information Technology Journal, 12: 6998-7003.
DOI: 10.3923/itj.2013.6998.7003
URL: https://scialert.net/abstract/?doi=itj.2013.6998.7003
DOI: 10.3923/itj.2013.6998.7003
URL: https://scialert.net/abstract/?doi=itj.2013.6998.7003
REFERENCES
- Kim, T.H. and S.R. Reid, 2001. Multiaxial softening hinge model for tubular vehicle roll-over protective structures. Int. J. Mech. Sci., 43: 2147-2170.
CrossRefDirect Link - Wang, X.F., Y.H. Sun, S.H. Ma, W. Wang, J.G. Wang and X.J. Zhang, 2012. Finite element analysis and design improvement of film picking forks roller tooth in field cleaning machine. Proceedings of the 5th Computer and Computing Technologies in Agriculture V, October 29-31, 2011, Beijing, China, pp: 519-526.
CrossRef