Sheng Jing
Faculty of Mechanical Engineering, XiaMen University of Technology, Xiamen, Fujian 361024, People Republic China
ABSTRACT
The finite element simulation of milling machining is a complex process. It is essential to develop a system to construct a model of simulation so as to obtain simulation data conveniently and rapidly. In this investigation, a parametric modeling was presented, using the commercial implicit finite element code MSC.MARC. Some key technologies were discussed, which include interface design, creating the parametrical modeling file and parametric setting of a workpiece and a milling tools property. Then, an example was given. As a result, the parametric modeling is an available way for fast modeling of finite element simulation of metal machining process.
PDF References Citation
How to cite this article
Sheng Jing, 2013. Kind of Modeling Method of Finite Element Simulation of Milling Process Based MSC. Marc. Information Technology Journal, 12: 8591-8597.
DOI: 10.3923/itj.2013.8591.8597
URL: https://scialert.net/abstract/?doi=itj.2013.8591.8597
DOI: 10.3923/itj.2013.8591.8597
URL: https://scialert.net/abstract/?doi=itj.2013.8591.8597
REFERENCES
- Crichigno Filho, J.M., 2012. Prediction of cutting forces in mill turning through process simulation using a five-axis machining center. Int. J. Adv. Manuf. Technol., 58: 71-80.
CrossRefDirect Link - Jin, X.L. and Y. Altintas, 2012. Prediction of micro-milling forces with finite element method. J. Mater. Process. Technol., 212: 542-552.
CrossRefDirect Link - Liu, F.S. and I.B. Ronaldo, 2010. Stabilized low-order finite elements for frictional contact with the extended finite element method. Comput. Methods Applied Mech. Eng., 199: 2456-2471.
CrossRef - Pedro, J.A. and O. Tugrul, 2010. Investigations on the effects of friction modeling in finite element simulation of machining. Int. J. Mech. Sci., 52: 31-42.
CrossRef - John, M.R.S., K. Shrivastava, N. Banerjee, D.P. Madhukar and B.K. Vinayagam, 2013. Finite element method-based machining simulation for analyzing surface roughness during turning operation with HSS and carbide insert tool. Arabian J. Sci. Eng., 38: 1615-1623.
CrossRef - Tang, L.H., J.L. Huang and L.M. Xie, 2011. Finite element modeling and simulation in dry hard orthogonal cutting AISI D2 tool steel with CBN cutting tool. Int. J. Adv. Manuf. Technol., 53: 1167-1181.
CrossRef - Ozel, T., T. Thepsonthi, D. Ulutan and B. Kaftanoglu, 2011. Experiments and finite element simulations on micro-milling of Ti-6Al-4V alloy with uncoated and cBN coated micro-tools. CIRP Ann. Manuf. Technol., 60: 85-88.
CrossRef